15 5Ph Magnetic Properties
15 5Ph Magnetic Properties. It is used in applications requiring better corrosion resistance and transverse properties compared to other similar martensitic grades. This material is supplied in either the annealed or overaged condition and is heat treated after fabrication.
This alloy has a typical density of 7.8 kg/dm³ and magnetic permeability of 95. Its toughness, ductility, hardness and corrosion resistance are comparable with 304 stainless steel. It is used in applications requiring better corrosion resistance and transverse properties compared to other similar martensitic grades.
Solution Treated (A) Tensile Strength.
Strength and toughness desired can be altered by temperate range in the heat treatment process. Uns s15500 | ams 5659 | astm | a564. Martensitic stainless steels were designed as a type of alloy which is corrosion resistant and could also be hardened through heat treatment.
Condition Tensile Yield 0.2% Offset Elongation (%In 2) Reduction Of Area Brinell Hardness Rockwell Hardness Ann 363 Bhn C33 H900 190,000 Psi 170,000 Psi 6% 15% 388 Bhn C40.
Its toughness, ductility, hardness and corrosion resistance are comparable with 304 stainless steel. The chemical analysis is balanced to give a minimum of delta ferrite, thus allowing superior transverse toughness and ductility, plus good forgeability. It is resistant to general corrosive environment.
Steel Grade Dimension Shape Unit
This alloy has a typical density of 7.8 kg/ dm³ and magnetic permeability of 95. This material is supplied in either the annealed or overaged condition and is heat treated after fabrication. This alloy has a typical density of 7.8 kg/dm³ and magnetic permeability of 95.
Uns S15500 Is A Martensitic Precipitation Hardening Grade.
The mechanical properties in larger sections and forgability are superior to that of 17/4 ph. Condition condition condition condition a h 900 h 1075 h 1150 density, lbs/in3 (g/cm3) 0.28 (7.78) 0.282 (7.80) 0.283 (7.81) 0.284 (7.82) thermal conductivity btu/hr/ft2/in/°f (w/m•k) 300°f (149°c) 124 (17.9) 500°f (260°c) 135 (19.5) 900°f (482°c) 157 (22.6) mean coefficient of thermal expansion. The mechanical properties in larger sections and forgeability are superior to that of 17/4 ph.
This Paper Explaine The Behaviour Of The Above Grade In Terms Of Magnetic And Mechanical Properties And The Reason Why 15.5Ph Has Lower Magnetic Properties ( Permeability And Hc) At Any Aging Temperature ( From H900 To H1150 ) As You Will Verify, You Have To Decide Which Kind Of Heat Treatment Condition You Prefere.
Proof strength r p0.2 (mpa) tensile strength r m (mpa) impact energy kv(j) elongation at fracture a(%). It is used in applications requiring better corrosion resistance and transverse properties compared to other similar martensitic grades. Both products are easy to heat treat and machine, making.
Post a Comment for "15 5Ph Magnetic Properties"